DESCRIPTION

Direct-fit Syvecs standalone ECU. Connects to the factory wiring harness using OEM plugs in the OEM location. No patch harness required. Uses the factory wideband O2 sensor but allows additional sensors. IP67 rated. Mounts using a Syvecs-supplied panel. Purchase includes ECU firmware/tuning license; kits are sold with or without EVP tuning support. A start-up file is provided if tuning support is not purchased. Syvecs produces PNP kits for multiple European cars and was the first to make a PNP ECU kit for the Can-Am X3.

• Direct plug-and-play with factory harness — NO PATCH HARNESS
• IP67 environmental rating
• Programmable engine, boost, traction, and launch control
• Adjustable launch control with anti-lag and ramp-in maps
• Closed-loop boost control with wideband lambda
• Closed-loop lambda via Bosch LSU 4.9 Lambda Sensor
• Flex-fuel and support for up to 8 injectors
• Compatible with factory DPS and OEM dash/controls
• Built-in data logging up to 8 hours; data rates up to 1000Hz
• Rolling anti-lag for building rolling boost
• Anti-theft and valet modes
• RJ45 Ethernet port for real-time remote tuning (WiFi/additional components required)
• Adjustable traction control using lateral G, GPS speed, or wheel speeds
• Four selectable target slip maps with immediate torque reduction options (ignition retard or fuel cut)
• Configurable engine safety trips (e.g., oil temp, oil pressure)
• Fuel pump control for main DI pumps and sub pumps; relative fuel pressure monitoring and limiting under boost
• Four pedal-to-throttle angle maps with multipliers and steering-wheel adjustment
• Per-cylinder closed-loop knock control with adjustable frequency, windows, gains, and full-cylinder shutdown option
• Adjustable torque ramp after launch
• Supports MAP sensors up to 7 bar
• Can accept external sensors to trigger safety trips (e.g., crankcase pressure, damper position)
• Accepts any DBW throttle body size
• Wet and dry nitrous control; drives solenoids directly and controls N2O heaters via pressure monitoring
• Control of external vehicle features based on sensors (e.g., adjustable wing, exhaust valves)
• Compatible with Syvecs Tinydash and most aftermarket race displays

FITMENT

2021-'23 Can-Am Maverick X3 Turbo RR

Manufactured by Evolution Powersports. Official specs and resources: EvoPowersports.com.

Product Disclaimers | Installation Instructions | Terms and Conditions