EVP High Flow Intake (HFI) Kit for Can-Am Maverick R
0Low stock
0In stock, ready to ship
Couldn't load pickup availability
Fast Shipping
Free Returns
Best Deals
Get notified by email when this product becomes available
Have a question?
Description
DESCRIPTION
Reduces intake restriction and smooths airflow to the turbo. Locates the filter in the high-pressure zone of the intercooler ducting and works with firewall-vented ducting or the OEM roof scoop. Tested with the stock turbocharger and the P47 turbo upgrade. USA-made filter with 2x the filtration media of the OEM unit. Integrated ram-air venturi and an oversized wire-reinforced silicone connector maintain shape and improve turbo efficiency. Provides up to 23 WHP* over the factory airbox at 9000 RPMs on our X85 DCT+ tune.
*EVP Note: These gains were achieved on a race version of our X85 tune with raised rev limits and higher shift points. The vehicle also had a full EVP exhaust system.
Kit includes:
- EVP intake tube
- High-flow air filter and prefilter
- Venturi and brackets
- Installation hardware
Key features:
- Reduced restriction and quicker turbo spool
- 2x filter media vs. OEM
- Wire-reinforced, oversized silicone hose
- Built-in valve cover breather and boost recirculation port
- All installation hardware included
FITMENT
2024 Can-Am Maverick R
INSTRUCTIONS
Maverick R High Flow Intake Installation Instructions
EVP High-Flow Air Filtration Media With Prefilter
MAINTENANCE
- Adjust filter service interval to riding conditions. Increase frequency for snow, dry sand, dirt, gravel or group rides.
- Inspect for leaks. A dust streak on the clean side indicates a leak. Replace if damaged.
- Tap the paper element to remove heavy dust. Replace filter if needed: HERE.
Manufactured by Evolution Powersports. Official specs and resources: EvoPowersports.com.
Product Disclaimers | Installation Instructions | Terms and Conditions