EVP ECU Bench Power Flash for 2017+ Sea-Doo GTR 230 HP (ECU Send-In)
Couldn't load pickup availability
DESCRIPTION
| ECU FLASH STAGE | RPM | 5-60 mph | TOP SPEED GPS | TOP SPEED CLUSTER |
|---|---|---|---|---|
| Stock GTR (230 HP) | 7800 | 7.66 @ 506 ft. | 64mph | 64mph |
| EVP Stage 1 | 8300 | 5.03 @ 274 ft. | 69.4mph | 70mph |
| EVP Stage 1+ | 8400 | 4.61 @ 252 ft. | 70.3mph | 71mph |
EVP DISCLAIMER: All runs done at or near sea level under optimal conditions with a 225-lb. rider in fresh water. Performance results will vary depending on ambient temperature, altitude / DA (density altitude) and water conditions.
- STAGE 1 BENCH FLASH ONLY: Includes EVP GTR tuning file.
- STAGE 1: EVP GTR tuning file, Solas 14/19a Impeller, 159mm Wear Ring. (ECU Bench Flash via mail-in)
- STAGE 1+ (For 2020+ GTR models only): EVP GTR tuning file, Solas 14/19a Impeller, 159mm Wear Ring, EVP Intake Kit. (ECU Bench Flash via mail-in)
- Higher top speed and raised rev limits
- Improved throttle response and acceleration
- Optimized ignition and fuel delivery for immediate power delivery
FITMENT
2020-2024 Sea-Doo GTX/Limited 230
2020-2024 Sea-Doo GTR 230
2020-2024 Sea-Doo Wake Pro 230
2017-2019 Sea-Doo GTR-X 230 (Not compatible with Stage 1+)
FITMENT NOTE: EVP ECU Power Flashes for Sea-Doo are not compatible with GTR models with IDF at this time.
Manufactured by Evolution Powersports. Official specs and resources: EvoPowersports.com.
Product Disclaimers | Installation Instructions | Terms and Conditions
Fast Shipping
Free Returns
Best Deals